nC ProTherm ISO-X is a sprayable thermal insulating coating for interior and exterior surfaces. In addition, it prevents condensation in the interior. nC ProTherm ISO-X adheres chemically to every surface by a sol-gel process and is free of solvents.
nC ProTherm ISO-X can be applied in one layer in 3 mm to 12 mm WFT. Life cycle of 15 to 25 years, depending on environmental factors.
Key features
- Thermal insulating coating for indoor and
exterior surfaces. - Breathable, does not form a damp screen.
- Can be applied in a single layer.
Technical details
Suitable for
All surfaces, including glass and wood.
Indoor and outdoor performance requirements.
Temperatures below zero down to -90 ⁰C.
Pretreatment
Remove dirt, grease, loose corrosion, mill scale.
Application method
Spray, brush or putty knife.
Layer thickness
3 mm to 12 mm Wet Film Thickness (WFT).
Consumption
Low consumption 370gr per m2 per mm Wet Film Thickness (WFT).
Drying time
Allow surface to rest for 12 hours before repainting.
Lambda value
0.022λ
RAL color
Standard color RAL 9010.
Product life
15 to 25 years.
Storage
Store between 5°C and 25°C.
Store for up to 12 months in tightly closed containers.
Fire class
Buildings D-S2-d0.
Suitable for both interior and exterior walls
nC ProTherm ISO-X is available in any RAL color, and therefore suitable for insulating interior and exterior walls.
Fast single layer application
Because nC ProTherm ISO-X can be set up in one layer, a lot of time can be saved.
High insulation value with fraction of the layer thickness
Nano technology allows the same insulating value to be achieved with only 10% of the material thickness, compared to traditional insulation material
Projects
Discover how our nC ProTherm products offer a solution to our customers.
Atlas Copco Rentals Netherlands
Corrosion passivation and sealing of generators
Rust developed in several areas of the generator sets. Atlas Copco asked [...]
Rederij Vroon, Netherlands
Passivation and sealing of ventilation shafts
The ventilation shafts of a total of 4 livestock carriers of shipping [...]
Rederij Cement Tankvaart BV
Protect back and front peaks
The aft and for peaks of most of Rederij Cement Tankvaart's cement [...]
Elio Barone, Netherlands
Corrosion passivation waterline
The waterline of the Res Nova from Dordrecht suffers from ever-recurring rust. [...]
De Ruiter Staalkabels BV, Netherlands
Passivation and lubrication of new and used steel cables
De Ruiter Staalkabels BV's non-galvanized/not galvanized steel cables must be lubricated and [...]
Shipping company MSG, Würzburg, Germany
Corrosion passivation peaks and ballast tanks
The ballast tanks of the entire MSG Babetta tugboat of shipping company [...]
Fugro Marine Services, the Netherlands
Passivation and sealing of fresh water tanks
The surfaces of the 4 fresh water tanks of the Fugro Supporter [...]
Bocimar, Belgium
Corrosion passivation and sealing of damp hold floor
The hold floors of the Mineral Honshu must be protected from corrosion. [...]
KMG Rides , Nederland
Ballast tanks passivation of amusement park attractions
Several rides already installed, as well as new construction, are balanced by [...]
Construction company and owner together, the Netherlands
THQ beams passivation
The parking garage in question was constructed using hollow THQ beams (hat [...]
BAM
Protecting and sealing 900m2 of window surface
After installing the glass, it becomes apparent how important clean windows are [...]
Shipping company MSC, Malta
Thermal insulation of steam and condensation pipelines
The steam pipes and condensation pipes of the MSC Clementina F are [...]
Jansen Huybregts Onderhoud Renovatie BV, Nootdorp
Thermal insulation Partition walls
The building "The General" on Gen. Spoorlaan in Rijswijk was converted from [...]
Meerbouw Rotterdam B.V.
Thermal insulation of facade walls
The house was built in 1938 and has no cavity walls. A [...]
Fugro Marine Services
Passivation and conservation of drinking water tanks
Fugro has applied nC Marine's corrosion passivation and sealing to ballast water [...]
Hebo Maritiemservice B.V.
Corrosion passivation ballast tanks HEBO Lift 8
In the first week of January, we were at work at HEBO [...]
Shipyard Reimerswaal
Corrosion passivation ballast tanks of bridge pontoon
In 2022, we started the passivation of 400 m3 ballast tanks of [...]
GEFO Shipping Group
Corrosion passivation ballast tanks Schloss Oranienbaum
In October 2020, we treated the ballast tanks of the Schloss Oranienburg [...]
Kotug
Corrosion passivation of tugboat Adriaan
Kotug is a leading towing company offering its services to ports and [...]
Shipping Company Green
Corrosion passivation of ballast water tanks
A series of 4 ships from Rederij Groen, Scheveningen, Netherlands, have undergone [...]
Kooiman Van Os Shipyard
Corrosion Passivation Vistrawler
Shipyard Kooijman Van Os in Yerseke benefited from the floating capabilities of [...]
Tata Steel
Thermal insulation and passivation.
The coal grinding plant including inlet and outlet pipes on top lose heat. [...]
Kolmer Elektromotors
Top coating developed for Kolmer
Kolmer Electric Motors has been designing and manufacturing motors for many years. [...]
