One of the known clean fuels is methanol. A stainless steel tank is often considered, but existing steel diesel tanks can be quickly and permanently protected from corrosion by passivation, without the need for grit blasting. Read more about tank passivation in the project below.
PRODUCTS: nC Corrosion Passivator Primer, Undercoat21, Cold Alloy (CA), High Chemical Resistance (HCR). View Products. PROJECTS:
Ballast tanks & driers passivation
Ballast tanks and floats are passivated against corrosion in a short time for a long period, by means of floating or spraying. Corrosion passivation is possible without a dry surface. Rust removal is not necessarily necessary. Read more about the passivation of tanks and floats in the projects below.
PRODUCTS: nC Corrosion Passivator Fluid, Primer, Undercoat21, Heavy Duty. View Products. PROJECTS:
Passivation of pipes & sprinklers
Corrosion formation on and in pipelines, sprinklers or outlets occurs frequently. Both the exterior (spot repair or spraying), and the interior walls of pipes (by floating) are treated with nC Corrosion Passivator. Read more about passivation of pipes in the project below.
Structural components and related sheet metal of energy-generating or -delivering structures are on mountains, in deserts, in the sea or high in the sky. For this purpose, nC Corrosion Passivator Heavy Duty was developed. Learn how to protect these heavily loaded parts from corrosion.
PRODUCTS: nC Corrosion Passivator Undercoat21, Zinc Primer C5, Heavy Duty. View Products . PROJECTS:
Passivation of hot surfaces
Hot surfaces often rust because there is no good long-term protection that can withstand the high temperatures. nC offers a number of corrosion passivators that continue to provide protection at surface temperatures from -180⁰C to 1300⁰C. Read more in the projects about how chemically binding nC corrosion passivator can protect your exhausts, heat shields or pipelines.
PRODUCTS: nC Corrosion Passivator High Heat Primer (HT) and nC Corrosion Passivator Cold Alloy (CA). View Products . PROJECTS:
Passivating damp surfaces
Many structures in the energy sector are found in damp conditions. Drying to coat is often not an option. nC Corrosion Passivator, on the contrary, can also be processed on damp surfaces, allowing maintenance to be carried out here and now. Read how this works in the project report below.
PRODUCTS: nC Corrosion Passivator Primer, Undercoat21, Heavy Duty and Fluid. View Products . PROJECTS:
Passivation of masts
For example, wind turbine towers must be extremely well protected from corrosion. Bending and stretching, heat and cold, wet and dry, hot and cold. That’s where nC’s chemically binding and therefore flexible corrosion passivators can handle well, for very long periods of time. Learn how to give your parts extra protection with passivation.
Keeping already produced steel cables lubricated and corrosion free is not easy. Together with a well-known wire rope manufacturer, nC has developed a passivator and lubricant in one, which by using different techniques always penetrates between the individual strands/yarns. Read the project reports below.